Membrane-covered chlorine dioxide sensors
Send an enquiry
Find the data sheet you needProduct description
- Measured variable: Chlorine dioxide
- Calibration: at the controller, via analytical chlorine dioxide determination by DPD-1
- Interferences: Cl₂ is measured at a factor of 0.03, O₃ is measured as well
- pH range: 1 … 11
Scope of supply
- CD4.2: sensor, membrane cap, electrolyte
Areas of application
- Fresh water, must not contain surfactant
Product description
- Measured variable: Chlorine dioxide
- Calibration: at the controller, via analytical chlorine dioxide determination by DPD-1
- Interferences: Cl₂ does not interfere, O₃ is measured at a factor of 25 compared with ClO₂
- pH range: 2 … 11
Scope of supply
- CD10: sensor, membrane cap, electrolyte
Areas of application
- Fresh water, surfactants are tolerated
Non-membrane-covered chlorine dioxide sensors
Product description
- Measured variable(s): Chlorine dioxide
- Calibration at the controller, by DPD 1 method
- Interferences: ozone, chlorine and chlorite each contribute less than 2%
- pH range: 1 … 9
Scope of supply
- AS2, AS3: sensor, electrolyte sleeve, electrolyte
Areas of application
- Fresh water, especially drinking water, up to max. 70 °C
Product description
- Measured variable(s): Chlorine dioxide
- Calibration at the controller, by DPD 1 method
- Interferences: ozone, chlorine and chlorite each contribute less than 2%
- pH range: 1 … 9
Scope of supply
- DOSASens ILS2 chlorine dioxide sensor, electrolyte sleeve, electrolyte, operating instructions
Areas of application
- Fresh water, especially drinking water, up to max. 50 °C